Specials

Paradigm - Millenia CT

PARADIGM - MILLENIA CT SYSTEM

Retail
R15,995

Once Off Special
R9,995

Overall System (Speakers & Subwoofer)

 

Amplifier Built in 3-channel Ultra Class D amplifier: 40 watts RMS x 2 satellite speakers, 80 watts RMS subwoofer. System Peak Power of 480 watts.
Frequency Response   On-Axis ±2 dB 32 Hz – 20 kHz
Frequency Response   30° Off-Axis ±2 dB 32 Hz – 18 kHz
Specifications are subject to change without notice.

Speakers

 

Design 2-driver, 2-way vented die-cast aluminum enclosures with integrated baffle and chassis. Low-diffraction grilles maximize imaging and ensure smooth dispersion.
Crossover 3rd-order electro-acoustic at 2.2 kHz
Frequency Response   On-Axis ±2 dB 140 Hz – 20 kHz
Frequency Response   30° Off-Axis ±2 dB 140 Hz – 18 kHz
High Frequency Driver 25-mm (1 in) S-PAL™ satin-anodized pure-aluminum dome
Mid/Bass Frequency Driver 102-mm (4 in) S-PAL™ satin-anodized pure-aluminum cone
Low Frequency Extension 80 Hz (DIN)
Sensitivity   Room / Anechoic 88 dB / 85 dB
Impedance Compatible with 8 ohms
Finishes Black Gloss
Weight 5 lbs. (2.27 kg)
Dimensions   HxWxD Including stand 7.75″ × 4.5″ × 5.75″ (19.7cm × 11.4cm × 14.6cm)
Accessories Included Tabletop / shelf stands
Specifications are subject to change without notice.

Powered Subwoofer

 

Design Single driver, bass reflex design, dual low-turbulence resistive ports, built-in 3-channel amplifier
Amplifier Built in 3-channel Ultra Class D amplifier. 40 watts RMS x 2 satellite speakers, 80 watts RMS subwoofer. System Peak Power of 480 watts.
Amplifier Features Auto-On / Standby, soft clipping
Low Pass Filter Frequency 150 Hz fixed
Low Frequency Driver 210-mm (8 in) reinforced polymer-composite cone, 38-mm (1-1/2 in) voice-coil
Low Frequency Extension 28 Hz (DIN)
Finishes Black
Inputs Optical digital; 3.5-mm auxiliary analog
Weight 12.5 lbs. (5.7 kg)
Dimensions   HxWxD Cradle adds 5/8-in / 1.6 cm to height. Bumper pads add 1 in / 2.5 cm to height in horizontal position 15.75″ × 5″ × 14″ (40.0cm × 12.7cm × 35.6cm)
Specifications are subject to change without notice.

ANTHEM-I225

Retail
R41 495

Demo Item with full Warranty. Box Slightly Marked
R19 995

PHONO PREAMPLIFIER The phono preamplifier is suitable for moving magnet and high-output moving coil cartrdiges
Input Impedance 47 kΩ
Input Capacitance 100 pF
Maximum Input 18 mV at 20 Hz, 140 mV at 1 kHz, 160mV at 20 kHz
Gain (at 1 kHz) 35 dB
Crosstalk (at 1 kHz) 80 dB
RIAA Response +/- 0.5 dB (100 Hz to 20 kHz); -1 dB (20 Hz)
THD+N (at 1 kHz, 5 mV input) 0.05%
S/N Ratio (ref. 5 mV at 1 kHz, IEC-A filter) 83 dB
PREAMPLIFIER
Input Impedance 30 kΩ
‘Pre-Out’ Output Impedance 560 Ω
‘Rec-Out’ Output Impedance 100 Ω
Rated Input 1.0 Vrms
Maximum Input 7.6 Vrms
Minimum Load 5 kΩ
Rated Output (100 k1 load) 1.0 Vrms
Maximum Output (100 k1 load) 7.6 Vrms
Headphone Output 500 mW into 32 Ω at 0.03% THD+N
Channel Separation (at 1 kHz) 75 dB
Crosstalk Between Inputs (at 1 kHz) 72 dB
XLR Pin Configuration Pin 1: Ground; Pin 2: Positive; Pin 3: Negative
Frequency Response and Bandwidth 20 Hz to 20 kHz (+0, -0.1 dB); 1 Hz to 170 kHz (+0, -3 dB)
THD+N (at rated input and output, 80 kHz BW) 0.003%
IMD (CCIF at 15 kHz and 16 kHz) 0.0005%
S/N Ratio (A-weighted, ref 2.0 Vrms) 105 dB
POWER AMPLIFIER (per channel, continuous RMS, 20 Hz to 20 kHz, <1.0% THD)
Frequency Response 20 Hz to 20 kHz (+0, -0.15 dB)
Bandwidth 1 Hz to 200 kHz (+0, -3 dB)
THD+N 0.01% at 1 kHz, 0.03% at 20 kHz (100 W into 8 1)
Power Bandwidth < 10 Hz to 100 kHz (+0, -3 dB, 200 W into 8 1)
Slew Rate 25 V/µs
Headroom 1.4 dB (8 1), 2.8 dB (4 1)
Damping Factor 80 at 1 kHz (ref. 8 1)
S/N Ratio (A-weighted, ref 225 W) 105 dB
Crosstalk > 57 dB (100 Hz to 10 kHz)
Voltage Gain 29 dB
CONTROL
Infra Red Carrier Frequency 38 kHz
Max. Emitter Current Pass-through of input
Trigger Input Polarity Non-polarized
Output Pass-through of input
POWER REQUIREMENTS
Impedance
# of Channels Driven 1 Both 1 Both
*Short Term 240 W 225 W (FTC) 330 W 310 W*
Power Consumption (8 Ω load) Maximum 800 W
Typical 300 W
Fuse Rating (Fuse is internal) Anthem serviceable only
Low Voltage Version: In countries where the line voltage is 120V, this product operates from a single phase AC power source that supplies between 108V and 132V at a frequency of 60 Hz.
High Voltage Version: In countries where the line voltage is 220V, 330V or 240V, this product operates from a single phase AC power source that supplies between 216V and 264V at a frequency of 50 or 60 Hz.
Dimensions
Width 5-7/8 inches (14.9 cm) including feet
Height Width 17-1/4 inches (43.8 cm)
Depth 18 inches (45.7 cm)
Weight (Unpacked) 42.6 lb (19.4 kg)
Advanced Load Monitoring (ALM)
Anthem® integrated amplifiers are designed to perform flawlessly – offering stunning musicality, tonal neutrality and incredible dynamics while driving any speaker load reliably under real-world conditions! The power supply is conservatively rated and the amplifiers run cool for greater reliability, but we didn’t stop there.

These amplifiers feature our ALM (Advanced Load Monitoring) circuitry which protects sensitive output devices by constantly monitoring temperature, current and voltage to ensure optimum long-term performance. ALM is totally non-invasive – it is not in the signal path and only engages in the most extreme circumstances to protect the amplifier from damage by maintaining the safe operating area of the output devices. Buyer beware however! Not all amplifier manufacturers have sophisticated load-monitoring provisions. Many have saved the added cost, leaving their output devices unprotected, choosing instead to use the amplifier’s output devices as “fuses.” At Anthem, ALM is just one of the ways in which our products provide owners with years of reliable service.